An electric van can suit a repeatable route with dependable charging, but the booking needs more than a daily mileage figure. Include the drive from the depot, loaded work, diversions, the return trip and a reserve. Then confirm that the allocated vehicle and charging arrangements can support the whole plan.
Use QVH’s electric-van hire page to discuss current options and availability. This guide deals with route and charging decisions; it is not a promise that every model, battery size or charge level is available.
Build a route sheet before comparing range figures
| Planning item | What to record | Why it changes the decision |
|---|---|---|
| Whole route | Depot collection, every stop, diversions and return. | The work route alone can understate the mileage. |
| Load and body | Weight, bulky goods, vehicle size and any equipment. | A different body or working load changes the requirement. |
| Conditions | Season, hills, road speeds and heating needs. | Real-world energy use varies; a headline range is not a guarantee. |
| Charging access | Available connectors, parking access, payment and opening hours. | A map pin does not prove that a van can use a charger. |
| Time | Arrival deadlines, breaks, loading and charging windows. | A workable energy plan may still fail the schedule. |
| Return | Agreed return location, time and required charge level. | Keep enough time and energy to complete the hire correctly. |
Energy Saving Trust’s electric-van guidance explains why charging needs to be included when assessing the working day. Its fleet toolkit also discusses seasonal effects. Do not use a fixed percentage reduction as a substitute for information about the actual vehicle and conditions.
A worked energy example, not a vehicle specification
The figures below are invented solely to show the arithmetic. They are not QVH fleet data, a recommended reserve or a prediction of any van’s range. Obtain suitable inputs for the allocated vehicle before using the method.
| Step | Illustrative calculation | Result |
|---|---|---|
| Usable battery | Assume 68 kWh usable capacity. | 68 kWh |
| Starting energy | 68 kWh × 90% starting charge. | 61.2 kWh |
| Reserved energy | 68 kWh × 20% intended remaining charge. | 13.6 kWh |
| Planned driving budget | 61.2 − 13.6 kWh. | 47.6 kWh |
| Estimated journey use | 100 miles × an assumed 0.45 kWh per mile. | 45 kWh |
| Margin above that reserve | 47.6 − 45 kWh. | 2.6 kWh |
The small remaining margin is the point of the example. Extra miles, a different starting charge or higher consumption could change the result. It would be unwise to turn the calculation into a guaranteed 100-mile itinerary. Revise the plan, add a dependable charging opportunity or consider another vehicle if the margin is unsuitable.
Check the charger, not just the charging map
Confirm the vehicle’s connector and supported charging rate. A charger’s advertised maximum is not a promise that the van will receive that rate throughout a session. The vehicle, charge level, temperature and equipment all affect charging.
Check the bay dimensions, height restrictions, cable reach and whether a loaded van can park without obstructing others. Verify payment access before the journey; do not discover at the charger that an account, card or app is needed. Identify a usable alternative if the first charger is occupied or unavailable.
Charging while loading or parked can be convenient only when it is permitted and compatible with the work. Do not run cables across pedestrian routes or assume a customer will let you use a socket. Follow the vehicle and charging-equipment instructions.
When might electric hire fit the job?
| More straightforward to plan | Needs closer investigation |
|---|---|
| A repeatable route with known stops. | Unpredictable mileage or frequent route changes. |
| Confirmed charging access during a useful parked period. | Dependence on one unverified public charger. |
| A suitable body and payload for the goods. | Choosing a battery van without checking the load requirement. |
| Time to collect, charge as needed and return. | A schedule that leaves no room for charging or disruption. |
This is a planning comparison, not a rule that one powertrain always wins. Compare the wider van range if the route cannot be supported confidently. The suitable choice is the vehicle that completes the actual work safely and within the agreement.
Ask about the return charge before collection
Confirm the starting charge, the return requirement and what applies if the van is returned below it. Do not import another rental company’s fuel or charging policy into a QVH booking. Ask which cables are supplied and how they should be returned.
For a business considering regular use, discuss a representative work pattern through fleet van hire or long-term hire. Keep a record of route, load, conditions, charging time and energy used during any agreed trial. One easy journey does not establish suitability for the busiest winter day.
Frequently asked questions
No. Treat it as a comparison figure and plan around the actual vehicle, load, conditions and charging opportunities. Include depot journeys and an appropriate reserve.
No. The vehicle’s limits and the conditions of the session affect the rate. Confirm compatibility and allow realistic charging time rather than dividing the battery size by a headline charger rating.
It can affect energy use, range and charging. Review the route for the season and the allocated van instead of assuming a summer journey will work unchanged in winter.
Ask QVH for the requirement in the actual agreement before collection. Do not assume that returning empty or paying a standard recharge fee is an available option.
No. Discuss the dates, route, load and charging access with QVH so current availability and suitability can be checked before booking.