Check a hire van before setting off, even if it was handed over in good condition. The useful question is not just “was it serviced?” but “is it safe for this journey, with this driver and this load?” A warning, damaged tyre or unsecured item needs attention before the day’s work begins.
The DVSA’s van walkaround checklist sets out the official checks. The guide below helps a hirer turn that checklist into a routine, with a clear way to report a problem. It does not replace the vehicle handbook or a competent inspection.
What should you check before driving?
Work around the van in the same order each time. Choose a safe, well-lit position away from moving traffic. Do not crawl underneath, dismantle components or open a hot cooling system. Ask for a demonstration at collection if you are unfamiliar with a control or a fitted item.
| Area | What to look at | What to report |
|---|---|---|
| Driving position | Clear glass and mirrors, working washers and wipers, secure seat and seat belt. | Poor visibility, damage or a restraint that will not work properly. |
| Controls | Warning lights, steering and brakes, following the handbook and collection demonstration. | A persistent warning, unusual response or change since the previous drive. |
| Around the body | Lights, tyres, wheels, doors and signs of leaking fluid. | Damage, an insecure door, a suspect tyre or an unexplained leak. |
| Load area | Load restraints, loose equipment, doors and any fitted loading equipment. | Movement, damage or equipment you cannot use safely. |
This groups the checks for convenience; it is not the complete DVSA checklist. Use the official list for the detail and the handbook for the correct settings. A visual walkaround is also different from the servicing and repairs described in QVH’s fleet services.
Agree the reporting process at collection
Before leaving the depot, save the hire reference, registration and assistance details supplied with the agreement. Ask who to contact about a warning or defect and what to do outside office hours. Do not assume that the general office number is the roadside assistance number.
For a business hire, nominate someone to receive reports and pass instructions to the driver. A driver should not have to choose between an unsafe journey and an unanswered message. Decide where unresolved concerns are recorded and how another employee will see them before taking the keys.
Booking paperwork has its own checklist in what documents you need to hire a van. Keep the safety routine separate so it is still followed after collection day.
Write a defect report that someone can act on
Describe the symptom rather than guessing the cause. “Front-left tyre has a visible cut” is more useful than “probably fine for today”. If safe to do so, take a clear photograph while parked. Do not use a phone while driving or repeatedly restart the van to make a warning disappear.
| Record | Example or purpose |
|---|---|
| Vehicle and driver | Registration, hire reference and the person making the report. |
| When and where | Date, time, mileage and a safe location where the van is parked. |
| What changed | The exact warning or symptom, when it appeared and whether it is persistent. |
| Action and reply | Who received the report, instructions given and whether the van remains out of use. |
For example: “At the first check this morning, the brake warning remained on after starting. The van is parked at our premises and has not been driven. Please advise the next step.” That gives the hire team an observation and a clear current status; it is not an attempt to diagnose the brakes.
When should you stop using the van?
Do not drive a vehicle with a dangerous defect. If a problem develops during a journey, find a safe stopping place and seek help. A delivery deadline or an approaching return time is not a reason to continue in an unsafe vehicle. Follow emergency instructions first if the stopping position itself is dangerous.
Uncertainty also deserves a call. Do not treat every amber warning as harmless or every unfamiliar noise as normal. Explain what you can see, consult the handbook and obtain appropriate instructions before continuing.
Recheck after a change of driver or load
A morning check does not tell the next driver what happened later. Include defects and instructions in the handover. After loading or unloading, check the remaining items and restraints again; removing one item can leave the rest loose.
For repeated business use, choose a reporting method drivers will actually use: a paper sheet kept with the keys or an existing company system. The HSE’s vehicle-maintenance guidance explains the employer’s wider role. If you drive for a business with an operator licence, use its defect-reporting system. Private hirers should still report concerns, even where that operator paperwork does not apply.
Choose a van the driver can use confidently
Start with the job and the driver’s experience, then compare the van range. If loading equipment is needed, read the tail-lift guide and arrange a demonstration of the actual equipment. A general walkaround is not training to operate it.
Frequently asked questions
Yes. Servicing deals with planned maintenance; a walkaround checks the condition before use. Report changes during the hire rather than waiting for a service or the return date.
No. It records the starting condition. Tyres, lights, load security and other items can change during the week, so make the pre-journey check part of the routine.
Do not attempt a repair without appropriate competence and the hire provider’s instructions. Report the symptom and follow the supplied assistance procedure. Stop using an unsafe vehicle.
Do not assume operator-licence paperwork rules apply to every private hire. All drivers still need a safe vehicle. A simple dated record of a concern and the response is useful, and business drivers should follow their employer’s system.
Pass on the latest check, any reported defect, the instructions received and the assistance details. An unresolved concern should stay visible rather than being lost when the keys change hands.